{{ cartCount }}
Precision marking, exactly to spec.
Material, environment and compliance standard settled before anything is cut, printed or engraved. Label and marking systems for switchboards, cable and infrastructure, made in Melbourne.
Six factors determine the right label for your project.
Laminated vinyl prints are sealed under a gloss or matte overlaminate that protects against abrasion, UV and cleaning.
Everything in one place
Technical data sheets, order templates, colour charts and a Safe Work & AS Compliance guide.
Open resourcesGet a sample pack before you order
One complete pack with every colourway and thickness we stock, posted anywhere in Australia. Pick the finish in your hand, not on a screen.
Request a sample packEight materials. One production floor.
Every material is cut to your dimensions, with multiple materials suiting any particular install. If you’re not sure which material to use, use the selector or send us an email. Some materials can also be combined to more accurately suit the application.
Tell us the job, we'll pick the material.
Most of our work falls into six categories. Each one links through to the material we would recommend.
{{ a.name }}
{{ a.desc }}
{{ mat.name }}
500×500
Applications
{{ mat.name }}
{{ mat.blurb }}
Colourways
Installation
{{ mat.install }}
Application instructions →Everything you need for install.
Technical data sheets, order templates, colour charts and application guides.
Technical data sheets
Guides & charts
Warranty & disclaimers
Safety signage that meets Australian standards.
As per Safe Work, AS 1319, AS 2444, AS 2700 & AS 3000 Guidelines.
This guide summarises the sizes and colours in common use and does not replace the standards themselves. Confirm requirements for your site with the relevant standard or regulator.
{{ c.name }}
e.g. {{ c.eg }}{{ c.rule }}
Send us what you have, we’ll do the rest.
A marked-up PDF, a DXF, a spreadsheet with the label information, or a photo of the label you need to match.
See the material before you order.
One complete pack — every material and colourway we stock — $40, posted Australia-wide.
swatch fan / flat lay
A new name on an established production floor.
Precision Labelling is the industrial labelling division of Recognition ID. Same building in Hallam, same lasers and UV presses, same people, now set up specifically for identification, marking and compliance work rather than awards and recognition.
What we do differently
Industrial labelling usually comes with minimum quantities, fixed catalogue sizes and a two week lead time. We built this division around the opposite: one-off plates, no set dimensions, fast dispatch, and a technical data sheet for every material so your site can be signed off as soon as possible.
Get in touch.
Hallam VIC 3803
Terms of Trade
These Terms of Trade apply to every quote, order and sample request placed with Precision Labelling, a division of Recognition ID (ABN 19 754 802 731), 2/60-62 Abbott Road, Hallam VIC 3803.
1. Acceptance of these terms
By requesting a quote, placing an order, or submitting artwork or order information through this website, you agree to be bound by these Terms of Trade. If you are acting on behalf of a company, you confirm you have authority to bind that company to these terms.
2. Quotes, pricing and orders
Prices shown or quoted are indicative, provided on application, and exclude GST and freight unless stated otherwise. A quote is not a binding offer — an order is only confirmed once we have issued a written order confirmation and, where required, received your approved proof and any deposit or purchase order. We reserve the right to correct genuine pricing or specification errors before production begins.
3. Artwork and proof approval
Production begins only once you have approved a proof in writing. You are responsible for checking spelling, part numbers, dimensions and colours shown on the proof — your approval confirms these details are correct. If you supply your own artwork, it must be print-ready; we are not responsible for reproducing detail that isn't present in a low-resolution file. See the Artwork & Proof Approval and AI-Generated Imagery disclaimers on our Resources page for further detail.
4. Payment terms
Unless otherwise agreed in writing, payment is due per the terms shown on your invoice, issued separately by our accounts team. Custom orders may require a deposit or payment in full before production begins. Goods remain our property until paid for in full, and we may pause production or dispatch if payment is overdue.
5. Delivery and risk
Delivery and lead-time estimates are our best assessment at the time and are not guaranteed unless agreed in writing. Risk in the goods passes to you on delivery or collection. We are not liable for delays caused by carriers, suppliers, or events outside our reasonable control.
6. Warranty and liability
To the extent permitted by law, our liability for any claim relating to goods or services we supply is limited, at our option, to repairing, replacing or re-supplying the goods or services, or the value of the order in question. Material- and process-specific warranty terms are set out in the Warranty & disclaimers section on our Resources page. Nothing in these terms limits or excludes any right, guarantee or remedy you have under the Australian Consumer Law that cannot lawfully be excluded.
7. Returns and cancellations
Because our products are custom-made to your approved proof, orders cannot be cancelled once production has started, and custom items cannot be returned or exchanged unless faulty. Let us know within 7 days of delivery if something isn't right, and we'll assess it and, where appropriate, repair, replace or refund the affected items.
8. Intellectual property
You retain ownership of any artwork, logos or content you supply to us, and you confirm you have the right to use it and that it doesn't infringe anyone else's rights. We retain ownership of any artwork, layout or proof we create on your behalf until it is paid for in full, after which you may use it for the purpose it was created for.
9. Governing law
These terms are governed by the laws of Victoria, Australia, and both parties submit to the non-exclusive jurisdiction of its courts.
Privacy Policy
This policy explains what personal information Precision Labelling, a division of Recognition ID (ABN 19 754 802 731), collects through this website and how we handle it, in line with the Australian Privacy Principles under the Privacy Act 1988 (Cth).
1. What we collect
When you submit a quote request, sample pack request, or order through this site, we collect the information you provide — typically your name, company, email address, phone number, delivery address, and details about the labels or signage you need, including any artwork or files you attach. We do not collect payment card details through this site.
2. How we use it
We use this information to prepare quotes, process orders, arrange delivery, and communicate with you about your enquiry or order. We may also use your contact details to follow up on a quote or send something you've specifically asked for, such as a sample pack.
3. Sharing and third parties
We don't sell your information. We share it only where necessary to fulfil your order or run this site — for example, with our website and forms hosting provider (Netlify), our couriers, and our accounting and invoicing software. These providers only use your information to perform the service we've engaged them for.
4. Cookies and analytics
This site embeds a Google Map on our Contact page, which may set cookies in line with Google's own privacy practices. Beyond this, we do not currently use tracking or analytics cookies. If that changes, we'll update this policy.
5. Data security
We take reasonable steps to protect the information you give us from misuse, loss and unauthorised access, including relying on our hosting and form providers' own security measures. No method of transmission over the internet is completely secure, and we can't guarantee absolute security.
6. Your rights and access
You can ask us what personal information we hold about you, ask us to correct it, or ask us to delete information we no longer need for legitimate business purposes such as order records. To make a request, contact us using the details below.
7. Contact us about privacy
For any question about this policy or your personal information, contact us at sales@precisionlabelling.com.au.
Order summary
See your label in real time.
Material, text, layout & colour. Everything here will also be listed on your quote and your order.