03 9898 8809
/
sales@precisionlabelling.com.au
Applications
Switchboards Control panels Compliance & rating plates ID tags Interior office marking Safety labelling
Laser engraved
2-Colour Acrylic
Engraving cuts through the cap layer to reveal the core colour, so the text is part of the material rather than printed on it. Seventeen colourways across two thicknesses, cut to any shape with adhesive or mounting holes.
Minimum single label size 25 × 8mm.
Maximum single label size 600 × 300mm.
Thickness
0.8mm · 1.6mm
Finish
Matte
Marking
Laser engraved · rotary engraved
↓ Technical data sheet (PDF)
Build a label with this material
Technical data
Material
Micro-surfaced impact modified acrylic
Thickness
0.8mm · 1.6mm
Marking process
Laser engraved
Minimum single label size
25 × 8mm
Maximum single label size
600 × 300mm
Adhesive maintenance temperature
−40 to +120°C (+160°C short term)
Indoor / outdoor suitability
Indoor & outdoor
Chemical resistance (material only)
Mild acids, diluted alkali, cleaners
Figures are taken from the current technical data sheet. Download the PDF above for the full specification.
Please note
Colour values are provided as a guide to the label background colour only and do not represent text colour. Slight colour variations between the displayed values and the finished product are considered normal due to manufacturing tolerances, material variations, and screen or print reproduction.
Engraving reveals the core colour — colour pairs are limited to stocked sheet combinations.
Rated for outdoor use, though prolonged full-sun exposure will gradually dull the surface.
Not suitable for continuous immersion or contact with strong solvents.
Chemical resistance data is provided as a guide only and is not exhaustive. End users are responsible for verifying suitability for their specific application.
Service life figures are indicative and assume normal installation and cleaning. Colours shown on screen are a representation only.
Build a label with this material
Contact us
Colourways
0.8mm
1.6mm
Select a material thickness to see the available colour options.
ABC 123
PL-WB08
White surface - Black laser engraving result
ABC 123
PL-BW08
Black surface - White laser engraving result
ABC 123
PL-WR08
White surface - Red laser engraving result
ABC 123
PL-RW08
Red surface - White laser engraving result
ABC 123
PL-YB08
Yellow surface - Black laser engraving result
ABC 123
PL-GW08
Green surface - White laser engraving result
ABC 123
PL-SBW08
Blue surface - White laser engraving result
Installation
Adhesive, non-adhesive and mounting hole options. Pressure-sensitive high strength modified acrylic suits most LSE and HSE surfaces.
Application instructions →