03 9898 8809
/
sales@precisionlabelling.com.au
Applications
GPO faceplates & switch mechanisms Control panels Decoration over engraved plates
Printable
UV Direct to Film
Printed direct to the material or supplied as a clear backed transfer. Indoor & outdoor use, and often used for faceplate and switch mechanism labelling where a seamless edge is needed.
Minimum single label size 40 × 15mm.
Maximum single label size A2 · 420 × 594mm.
Thickness
0.3mm
Finish
Direct to substrate or clear transfer, full colour
Marking
UV direct to film
↓ Technical data sheet (PDF)
Build a label with this material
Technical data
Material
UV Direct to Film 0.3mm
Thickness
0.3mm
Marking process
UV direct to film
Minimum single label size
40 × 15mm
Maximum single label size
A2 · 420 × 594mm
Indoor / outdoor suitability
Indoor & outdoor
Chemical resistance (material only)
Isopropyl alcohol, mild acids, window cleaners
Figures are taken from the current technical data sheet. Download the PDF above for the full specification.
Please note
Customer-supplied substrates remain the customer's responsibility for suitability, compliance, and fitness for purpose.
Our responsibility is limited to the quality and performance of the printed UV-DTF transfer as applied to the supplied substrate.
Indoor & outdoor use. Print is not rated for immersion or abrasive cleaning.
Best applied to smooth, non-porous surfaces; apply at room temperature.
Chemical resistance data is provided as a guide only and is not exhaustive. End users are responsible for verifying suitability for their specific application.
Service life figures are indicative and assume normal installation and cleaning. Colours shown on screen are a representation only.
Build a label with this material
Contact us