03 9898 8809
/
sales@precisionlabelling.com.au
Applications
Asset & ID tags Machine nameplates Control panels Electrical / switchboard enclosures
Laser engraved
Coated Aluminium
Engraved through the coating to the bright aluminium beneath, at 0.5mm and H25 temper. Thin enough to wrap a shallow curve, tough enough for outdoor service.
Minimum single label size 40 × 15mm.
Maximum single label size 600 × 300mm.
Thickness
0.5mm
Finish
Gloss coated
Marking
Laser engraved
↓ Technical data sheet (PDF)
Build a label with this material
Technical data
Material
Coated aluminium 0.5mm · H25 gloss
Thickness
0.5mm
Marking process
Laser engraved
Minimum single label size
40 × 15mm
Maximum single label size
600 × 300mm
Adhesive maintenance temperature
−40 to +120°C (+160°C short term)
Indoor / outdoor suitability
Indoor & outdoor
Chemical resistance (material only)
Most industrial chemicals
Figures are taken from the current technical data sheet. Download the PDF above for the full specification.
Please note
Engraved through the coating, so the mark is the bright aluminium beneath — contrast varies with viewing angle.
Coating is not intended for abrasive cleaning or high-pressure washing.
Chemical resistance data is provided as a guide only and is not exhaustive. End users are responsible for verifying suitability for their specific application.
Service life figures are indicative and assume normal installation and cleaning. Colours shown on screen are a representation only.
Build a label with this material
Contact us
Installation
Adhesive, non-adhesive and mounting hole options. Pressure-sensitive high strength modified acrylic suits most LSE and HSE surfaces.
Application instructions →