03 9898 8809
/
sales@precisionlabelling.com.au
MATERIAL PHOTOS
Cable IDs
500×500
Cable IDs
500×500
Applications
Cable Identification Test & tag Asset and inspection tagging Service & maintenance labels
Printable
Cable IDs
Printed vinyl cable labels with a self-laminating clear wrap. Sequential numbering, barcodes and QR codes are available, with no minimum quantity.
Minimum single label size 35 × 15mm.
Maximum single label size 165 × 57mm.
Vinyl
Printed cable information with a self-laminating clear wrap
Cable diameter
2–15mm O.D.
Marking
Sequential numbering, barcodes and QR codes
Technical data
Material
Clear protective overlaminate for printed applications
Finish
Transparent gloss
Thickness
70µ
Printable area
White background, black text (other colours on request)
Font
Arial (other fonts on request)
Cable diameter range
2–15mm O.D. (larger on request)
Adhesive
Permanent solvent-based pressure-sensitive acrylic
Maintenance temperature
−30 to +60°C
Chemical resistance (material only)
Common workplace contaminants and mild chemicals
Figures are taken from the current technical data sheet. Download the PDF above for the full specification.
Please note
Chemical resistance data is provided as a guide only and is not exhaustive. End users are responsible for verifying suitability for their specific application.
Service life figures are indicative and assume normal installation and cleaning. Colours shown on screen are a representation only.
Installation
Vinyl labels are adhesive only and are intended for surface identification, not for direct application to exposed conductors or internal wires. The adhesive needs a clean, dry, degreased surface above 10°C and reaches full bond after 24 hours.